THESE INSTRUCTIONS MUST BE FOLLOWED FOR US TO
GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM FOR
PROTECTING AGAINST LOSS FROM CONCEALED DAM-
AGE. THE FORM FOR FILING SUCH A CLAIM WILL BE
PROVIDED BY THE CARRIER.
UNPACKING
Unpack the product and check for any damage incurred during
transit. This should be reported to the responsible carrier, railway or
postal authority, and a request for a damage report should be made.
GENERAL INSTALLATION AND OPERATION
INSTRUCTIONS
Anvil Counter top pizza ovens have been designed for the baking of
pizza and bread products in direct contact with the ceramic decks.
Any other products must be placed in a suitable pan for baking.
1. Protective Film - Carefully remove the protective film from the
stainless steel before using oven for the first time. If any glue
residue should remain, remove it with a suitable solvent recom
mended for stainless steel. It is important to remove this film
before installation and use otherwise it will stick onto the stain
less steel and become very difficult to remove thereafter.
2. Positioning - Install the counter top pizza oven in the most con-
venient location for ease of cleaning, maintenance and general
operation. The unit should be placed a minimum distance of
100mm from any adjacent wall. If this appliance is to be posi-
tioned in close proximity to a wall, partitions, kitchen furniture,
decorative finishes, etc. it is recommended that they be made of
non – combustible materials. If not, they shall be clad with a
suitable non – combustible heat insulating material, and the
closest attention be paid to the fire prevention regulations.
3. Grounding - These counter top pizza ovens require a grounded,
receptacle.
Part
No.
1
BACK PANEL
2
POWER CORD
3
CABLE GRIP
4
CONNECTOR BLOCK
5
ELEMENT
6
TOP ELEMENT
7
BODY PANEL
8
SHELF ASSEMBLY
9
FRONT CONTROL PANEL
10 CONTROLTHERMOSTAT
11 SELECTOR SWITCH
12 CONTROL PANEL FACIA
13 BEZEL
14 CONTROL PANEL INSERT
15 CONTROL KNOB
16 PILOT LIGHT
17 INNER DOOR PANEL
18 DOOR HINGE
19 OUTER DOOR PANEL
20 DOOR NODE
21 DOOR HANDLE TUBE
22 15 MIN TIMER
23 CONTROL PANEL INSERT
24 ANVIL AXIS LOGO
25 BOTTOM COVER BRACE
26 RUBBER FOOT
27 BOTTOM PANEL
28 SHELF STOP BOTTOM
29 BAKING STONE
31 SHELF STOP TOP
Description
MODEL: COUNTER TOP PIZZA OVEN
MODEL CODE : POA1001 R02