P/N 1011965 Rev A 08/22
6
Operation
Overview
y
Normal Operation Mode
During Normal Operation Mode,
water enters the Inlet and flows
through the Filter before exiting the
outlet as usable product water.
The drain line runs continuously as
long as the system is making water.
This drain line flushes the minerals
removed by the RO membrane.
NOTE:
DO NOT plug or stop the water
flow from the drain line. If this
flow is stopped, water will
continued to be filtered, but the
system will not flush. This will
cause the RO membrane to plug
prematurely and reduce the life
of the RO System.
y
Tank Full Mode
When the tank is full, no water
runs out of the drain line.
CAUTION
Stopping the drain flow can cause the
Filter to plug prematurely and may
reduce the life of the filter. Consult
the factory for more information.
Figure 1.
System Components
Figure 2.
Water Connections
TDS MONITOR
FLUSH VALVE
CHECK VALVE
BLEND VALVE
SOLENOID VALVE
LOW PRESSURE VALVE
BRINE CONTROLLER VALVE
HIGH PRESSURE VALVE
T
T
T
F
B
S
H
BR
F
B
PUMP
S
H
BR
LPS
LPS
PRE-F
IL
TER
CARB
ON
RO
MEMB
RANE
PERMEATE
INLET
DRAIN
