Antunes 9700744 Page 24 Owner'S Manual Download

Page: 24 / 24

LIMITED WARRANTY

Equipment manufactured by A.J. Antunes & Co. has been constructed of the finest materials available and manu-

factured to high quality standards. These units are warranted to be free from defects in materials and workman-

ship for a period of one year from date of purchase under normal use and service, and when installed in accor-

dance with manufacturer’s recommendations*. The ultra filtration membrane cartridge is warranted under the

same terms and conditions on a prorated basis for 24 months from date of purchase.

*To ensure continued proper operation of the units, follow the maintenance procedure outlined in the Owner’s

Manual.

1. This warranty does not cover failures due to improper system installation, defects caused by improper storage or

handling prior to placing of the equipment into service. This warranty does not include overtime charges or work

done by unauthorized service agencies or personnel. This warranty does not cover normal maintenance, calibra-

tion, or regular adjustments as specified in operating and maintenance instructions of this manual, and/or labor

involved in moving adjacent objects to gain access to the Equipment.

2. A.J. Antunes & Co. reserves the right to make changes in design or add any improvements on any product. The

right is always reserved to modify equipment because of factors beyond our control and government regulations.

Changes to update equipment do not constitute a warranty charge.

If shipment is damaged in transit, the purchaser should make a claim directly upon the carrier. Careful inspec-

tion should be made of the shipment as soon as it arrives and visible damage should be noted upon the car-

rier’s documentation. Damage should be reported to the carrier. This damage is not covered under this war-

ranty.

4. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

INCLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR-

POSE, EACH OF WHICH IS HEREBY EXPRESSLY DISCLAIMED. THE REMEDIES DESCRIBED ABOVE ARE

EXCLUSIVE AND IN NO EVENT SHALL A.J. ANTUNES & CO. BE LIABLE FOR SPECIAL CONSEQUENTIAL

OR INCIDENTAL DAMAGES FOR THE BREACH OR DELAY IN PERFORMANCE OF THIS WARRANTY.

Prices and specifications are subject to change without notice.

Summary of Contents for 9700744

























Search results

Summary of Contents for 9700744

Reviews:

Related manuals for 9700744

Brands by name

Popular brands

Antunes 9700744, Owner'S Manual

Search results

Summary of Contents for 9700744

Reviews:

Related manuals for 9700744

Brands by name

Popular brands