CPIN002679
4
If you are still experiencing reception problems after installation, please refer to the
trouble-shooting guide below
Problems with Digital TV Reception
Unlike analogue terrestrial television, it is not possible to view digital channel under weak signal
strength conditions. Therefore, typically you will either receive digital channels with a clear picture and
sound or you will not receive any channels at all.
Insufficient digital signal can cause occasional blocking, freezing or complete loss of picture. Some roof
antennas may not be suitable for digital terrestrial television. Ensure that you have fitted a suitable
antenna to help improve signal quality to a suitable level for clear digital reception. Further check that
all connections & cable from antenna to receiver are good quality, secure and clean.
Blocking, freezing or complete loss of picture can also occur when a digital signal is too strong.
Adjusting the gain control knob until the picture improves may help.
TROUBLE SHOOTING
© This instruction leaflet is subject to copyright and must not be reproduced, copied or otherwise used in any
way or for any purpose without the consent in writing of the owner
Warranty
Arlec guarantees this product in accordance with the Australian Consumer Law.
Arlec also warrants to the original first purchaser of this product (“you”) from a retailer that this product will be free of defects in materials and
workmanship for a period of 12 months from the date of purchase; provided the product is not used other than for the purpose, or in a manner
not within the scope of the recommendations and limitations, specified by Arlec, is new and not damaged at the time of purchase, has not been
subjected to abuse, misuse, neglect or damage, has not been modified or repaired without the approval of Arlec and has not been used for
commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own expense, return the product, and provide proof of original purchase and your name,
address and telephone number, to Arlec at the address below or the retailer from whom you originally purchased the product within 12 months
from the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in the above manner and if, in Arlec’s reasonable opinion,
the Warranty applies, Arlec will at its own option and expense (or authorise the retailer to) replace the product with the same or similar product or
repair the product and return it to you or refund the price you paid for the product. Arlec will bear its own expenses of doing those things, and you
must bear any other expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may have under a law in relation to the product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.
Arlec’s telephone number, address and email address are:
Customer Service: (03) 9982 5111
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: [email protected]
ANTSIG is proudly produced by ARLEC Australia Pty. Ltd.
Visit us at: www.ANTSIG.com
CPIN002679
AMPLIFIER
AntEnnA DIStRIBUtIOn
AP862
AP864
AP868
2 WAY
DISTRIBUTION
AMPLIFIER
4 WAY
DISTRIBUTION
AMPLIFIER
8 WAY
DISTRIBUTION
AMPLIFIER