10 Defining General Settings
C76IB003EN-E
41
10 Defining General Settings
10.1 Instrument Settings
These settings are not method-dependent and thus will not change after a change
of the current method.
10.1.1
Date and Time
1. Tap <Menu> and select
"Setup > Control Panel > Date and Time"
.
2. Enter the current date and time and tap <OK>.
10.1.2
Regional Settings
1. Tap <Menu> and select
"Setup > Control Panel > Regional Settings"
.
2. Enter the "Language", "Data Format" (for numbers, date and time format,
etc.), and the "Keyboard Layout".
The instrument displays "Are you sure you want change the regional
settings? The instrument will reboot to complete this action."
3. Tap <Yes> to install the new settings.
The instrument reboots.
If the instrument is operated in a language or font you do not understand, proceed
as follows:
1. Tap the leftmost button in the main screen (<Menu>).
2. Select the menu item with the
symbol (menu
"Setup"
).
3. Select the second menu item (menu
"Setup > Control Panel"
) and again
the second menu item (menu
"Setup > Control Panel > Regional
Settings"
).
4. Use the drop-down boxes to set the desired language, data format and
keyboard layout.
5. Confirm each change with the rightmost button (<OK>) in the buttons area.
6. In the following dialog, tap the right button (<Yes>).
The instrument reboots.
