Appendix F: List of Output Quantities
C76IB003EN-E
129
Group: Density
Number of digits displayed with density values:
DMA 5000 M: 6
DMA 4500 M: 5
DMA 4100 M: 4
Apparent Density Brass
Apparent density referring to scales which
are adjusted with brass weights.
Apparent Density Steel
Apparent density referring to scales which
are adjusted with steel weights.
Apparent Specific Gravity
Apparent density divided by the apparent
density of water at the specified
temperature. Apparent density is the
weight in air (not mass!) divided by the
volume.
Density
Value of viscosity-corrected true density.
Density (not visc.-corr.)
Density value without viscosity correction.
The density is correct for samples with a
viscosity at around 1 mPa·s (water).
Noticeable high readings for samples of
higher viscosity.
Density Temperature
Temperature in the measuring cell
measured by the Pt 100 measuring
sensor.
Density Condition
Current status of the measurement.
Density Control Temp.
Temperature in the cell block measured by
the Pt 100 control sensor.
Density Set Temp.
Set measuring temperature.
Specific Gravity
Density of the sample at measuring
temperature divided by the density of
water at a measuring temperature.
Specific Gravity (not visc.-corr.)
Specific gravity without viscosity
correction.
Specific Gravity t/04
Density of the sample at measuring
temperature divided by the density of
water at 4 °C.
Group: Density (Expert)
d
Density number, calculated by subtracting
the density of water from the measured
density and dividing by the density of
water at measuring temperature.
d (not visc.-corr.)
Density number without viscosity
correction.
