Anton Paar 84138, Instruction Manual

Page: 27 / 162

C96IB01 27
EN
4. Enter the password again and press <Save>.
The password has now been saved.
5. Keep your password information safe.
To change or delete the password
1. Press <Menu> and select "Setup" .
2. Enter your password.
3. Select "Set Password" .
4. Enter the current password and press <OK>.
5. If you want to change the password, enter the new password.
Your settings are now protected with the new password.
6. If you want to disable the password protection entirely, enter <0000> as the new
password and press <Save>.
The password protection is now disabled.
8.9 Date and Time Settings
During operation the information header always displays the current date and time.
Date and time have to be set once during initial startup of the instrument.
To set date and time
1. Press <Menu> and select "Setup > Date and Time > Set Date and Time" .
2. Enter the current day, month and year using the arrow keys and confirm each of
your selections by pressing <OK>.
The cursor moves to the next value to be set.
3. Press <Save>.
Now the time settings are displayed on the screen.
4. Repeat the procedure to enter the current time and press <Save>.
Date and time are now displayed in the information header.
To set the date format
1. Press <Menu> and select "Setup > Date and Time > Date Format" .
2. Select the preferred date format and press <OK>.