Anton Paar 84138, Instruction Manual

Page: 24 / 162

24 C96IB01
EN
8 Defining the Basic Settings
8.1 Language Settings
You can choose between two different menu languages:
1. Press <Menu> and select "Setup > Language" .
2. Select the preferred language and press <OK>.
8.2 Units
1. Press <Menu> and select "Setup > Units" .
2. Select g/cm
3
or kg/m 3 as the density unit and press <OK>.
3. Select °C or °F as the temperature unit and press <Save>.
Your settings are saved and the measuring results are shown in the selected
units.
8.3 Sound Settings
When sound is enabled, DMA 35 beeps when it is switched on and off and when a
key is pressed.
When sound is disabled, the instrument only beeps when it is switched on and off.
1. Press <Menu> and select "Setup > Beep" .
2. Select the preferred setting (Beep on/off) and press <Save>.
8.4 Energy Saving Mode
Enabling the energy saving mode lowers the power consumption of the instrument
and thus extends battery life. When the energy saving mode is enabled, the
instrument will automatically switch itself off after 3, 5 or 10 minutes of inactivity.
When the energy saving mode is disabled, the instrument will remain switched on
until it is turned off using the
key.
1. Press <Menu> and select "Setup > Energy Saving" .
2. Select the preferred setting (Off, 3, 5 or 10 minutes) and press <Save>.