Anthos SMART TOUCH R7, Operating Instruction

Page: 32 / 90

32 32 EN
R7
- OPERATING INSTRUCTION
5.1.3. Programming the chair positions A, B, C and D
This setting is specific for each operator.
Perform the following operations from the main screen:
• Bring the dental chair into the desired position with the manual movements
buttons.
NOTE
: the position of the bowl can be saved, if powered.
• Hold button “SAVE” for at least 2 seconds to activate memory mode.
NOTE: Storage mode activation is signalled by a short beep and
by the dedicated icon (
A
) on the TOUCH DISPLAY.
• Push the A, B, C or D keys to associate the relevant position to the key
(e.g. C).
NOTE:
The icon (
B
) referring to the program selected (e.g. C)
will appear on the TOUCH DISPLAY to confirm that it has been stored.
NOTE : To call up a set position simply briefly press the button
assigned to the relative position.
5.1.4. Emergency stop button
This button can be used in the event of an emergency to bring the patient
into the Trendelemburg position.
NOTE : The Trendelemburg position is already set and cannot be
changed.
5.1.5. SMART TOUCH screen disable button.
This button allows enabling/disabling the TOUCH DISPLAY screen so that
you can easily clean the console.
NOTE: The disabled status is indicated by a clear message on
the TOUCH DISPLAY.