31
31
EN
R7
- OPERATING INSTRUCTION
5.1.1.2.9. Operator data entry
From the GENERAL SETTINGS menu touch the icon button
to
access the OPERATOR DATA ENTRY submenu.
NOTE:
the data modified always refers to the operator set on the
main page.
• To enter the desired text, touch the icon buttons of the various letters (max.
20 characters).
• To enter capital letters, touch the icon button
.
• To enter numbers or special characters, touch the icon button
.
• To cancel any typing mistakes, touch the icon button
cancelling from
left to right.
• Once you have entered the text, touch the icon button
to exit from
the submenu and automatically save the data.
5.1.1.2.10. LANGUAGE selection
This setting is shared by all users.
From the GENERAL SETTINGS menu touch the icon button
to
access the LANGUAGE SELECTION SUBMENU.
• To change the language, touch the icon button of the relative flag.
• To confirm the setting selected, exit this submenu by touching the icon
button
.
5.1.2.
Setting the dental chair’s “rinse” and “home” positions
This setting is specific for each operator.
Perform the following operations from the main screen:
• Bring the dental chair into the desired position with the manual movements
buttons.
NOTE:
in the case of the “Rinse position” the position of the bowl
can be saved, if powered.
• Hold button “SAVE” for at least 2 seconds to activate memory mode.
The system beeps and the relevant icon (
A
) appears on the console
display to signal save mode has been activated.
NOTE:
Hold down button "SAVE" for at least 2 seconds to quit
without saving the changes made.
• Press buttons “
AUTOMATIC RETURN
” or “
RINSE POSITION
” to assign
the position to the button.
The icon (
B
) for the selected program will appear on the console display
to confirm the data have been saved.
NOTE:
The seat height cannot be changed when in the “RINSE
POSITION”.
NOTE:
The “RINSE POSITION” button brings the backrest and
seat into the rinse position.
When button “RINSE POSITION” is pressed again, the backrest and seat
return to the previous position.
Summary of Contents for SMART TOUCH R7
