C5 - ClearStream 5 Antenna Assembly
The C5 was specifically developed to receive low power and fringe high VHF DTV stations.
It can be used by itself or can augment an existing UHF antenna. Includes a UHF/ VHF combiner.
1.
The ClearStream 5 antenna comes with:
•
1 reflector
• 1 VHF loop element
• 4 Fiberglass Spacers
• 75 ohm balun
(internal)
2.
Feed the supplied bolts through the 4 holes in the square loop
element. Connect the square element to the fiberglass spacers
with the bolts and tighten.
2.
4.
Assembly complete.
Attach the C5 an-
tenna to any kind of mast or mount (up to 2” in
diameter) with the adjustable “U” bolt clamps.
3.
3.
Align the separating spacers and attach the reflector (grid) to
the spacers by threading the 4 bolts into the spacers. Next attach
the 2 “U” Bolt clamps through the holes in the rear frame.
1.
4.
Connecting
Bolts
Connecting
Bolts
Side View
• 8 Threaded Bolts
• 8 Washers
UHF/VHF diplexer
•
2 “U” Bolt mast clamps
•
