34
If you are working with a well-isolated solo signal (e.g., tracking in a studio
or off of a multi-track tape) you can typically set the Sensitivity control to 10
and forget it.
If, on the other hand, your signal is noisy or not well-isolated (as might be
more common in a live performance situation), it may be necessary to allow
more signal variation (lower Sensitivity numbers). However, if you back off
too much, the ATR-1’s ability to detect pitch may be affected.
As a rule, you should start with settings of about 7 to 10. If you want to
detect only highly stable sounds in low-noise conditions, settings of from 2
to 5 may be appropriate. If there is ambient noise or other interfering
sounds, try settings of from 15 to 20. Values close to zero or 25 are extreme,
and will typically not do anything useful.
The LCD parameter lets you set the maximum display contrast for your
viewing angle.
Owner Message Page
Edit Owner Name:
aaaaaaaaaaaaaaaaaaaa
This page is briefly displayed when the ATR-1 is powered on. This is where
you can show the world just how clever you can be in 20 characters. Enter
your message in exactly the same way that you enter Program and Song
names.
Display Screens and Menu Pages
