31
Note: The Mod Wheel messages can only vary the amount of vibrato from
none to the amount of vibrato set in the Vibrato page of the active
Program or Song. In order for Mod Wheel control to work, you must
have the Program’s or Song’s Depth set to a positive value and the
Wave Type set to SINE, SQUARE or SAW.
MIDI Page 3
These next two MIDI Control pages allow you to assign various MIDI con-
trollers to set selected ATR-1 parameters in real time. (Note that all MIDI
controller data must be sent on the MIDI Channel set on MIDI Page 1 in
order to be recognized.)
Midi Speed Step
Control aaa bbb
Assigning a MIDI Continuous Controller to the Speed parameter allows that
controller to override the current Program or Song Speed setting. Note that
this is simply a temporary override. The Program or Song’s programmed
setting is not affected. Changing to another Program or Song will cause
that Program’s or Song’s Speed parameter to be used.
The available values for this field are OFF or controller numbers 14 to 31.
Step allows the MIDI Data Increment controller (#96) to be used to control
stepping from Program to Program in Program Mode, or stepping among
Song Items in Song mode. The values which can be selected are OFF or 96.
MIDI Page 4
Midi Vib Rate Delay
Control aaa bbb
These parameters allow realtime MIDI control of Vibrato Rate and Delay.
Again, these are simply temporary overrides. The Program’s or Song’s
programmed settings are not affected. Changing to another Program or
Song will cause that Program’s or Song’s Vibrato parameters to be used.
The available values for these fields are “OFF” or controller numbers
14 to 31.
Display Screens and Menu Pages
