Antaira Technologies
STE-6104C-T-V2
4-Port Industrial Serial RS232/422/485 to Ethernet Device
Server, with Dual LAN; EOT: -40°C to 85°C; Version 2 Hardware
Quick Installation Guide
Version 1.0
(March 2021)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
1. P
ACKAGING
The package contains the following items:
x
STE-6104C-T-V2
x
Quick Installation Guide
x
7-pin Terminal Block
2 H
ARDWARE
D
ESCRIPTION
Front Panel Layout
Top Panel View
Product Overview
System Interface/Performance
y
15KV ESD Protection for serial signals
y
Ethernet connectivity 2*10/100Tx RJ45 ports
y
Store-and-forward switching architecture
y
4-Port RS232/422/485, Baud Rate up to 921 Kbps
y
Power port EFT protection: 2,000VDC; Single port ESD
Protection: 2,000VDC
Power Input & Connection
y
DC 12 to 48V redundant power, with a 7-pin removal
terminal block
y
It is recommended to use a UL listed industrial power
supply
Operating Temperature
y
Extended operating temperature model: -40°C to 85°C
Case/Installation
y
IP30 protection / DIN-Rail mount design
LED Indicators:
Name
Color
Status
Description
P1 / P2
Green
Off
Power is not connected
On
Power is connected
LAN
Green
Off
Ethernet Disconnected
Blinking
Data is transmitting on
Ethernet for 100Mbps
Orange
Blinking
Data is transmitting on
Ethernet for 10Mbps
COM
Green
Off
No data is transmitting on
COM port
Blinking
Data is transmitting on
COM port
RUN
Green
Off
System is not ready or
halt
Blinking
AP firmware is running
normally
ALM
Red
On
Alarm is triggered by user
defined events
Off
Alarm is not triggered by
user defined events
Installation Procedures:
Step 1:
Connect the STE-6104C-T-V2 to a power source.
Step 2:
Connect the STE-6104C-T-V2 to the Ethernet network.
Use a standard straight-through or cross-over Ethernet
cable. Always make sure the PC is on the same network
subnet as the STE-6104C-T-V2.
Step 3:
Connect the STE-6104C-T-V2
s serial port to a serial
device.
Step 4:
Mount the STE-6104C-T-V2 to a DIN-Rail.
