manualshive.com logo in svg

ANTAIRA LNP-2804GN-SFP-T, User Manual, Page: 51 / 147

Share
Download
ANTAIRA LNP-2804GN-SFP-T User Manual Download Page 51

Antaira Technologies - Industrial Ethernet Switches 

LNP-2804GN-SFP-T User Manual V1.0 

 

 

51 

 

The ensuing table for IGMP Static Groups Status settings are informational only: VLAN ID, 

Group IP Address, Member Ports, and Modify. 

 

Multicast Groups 

To access this page, click L2 Switching > Multicast > IGMP Snooping > Multicast Groups. 

The ensuing table for Multicast Groups settings are informational only: VLAN ID, Group IP 

Address, Member Ports, Type, and Life (Sec). 

 

Router Ports 

To access this page, click L2 Switching > Multicast > IGMP Snooping > Router Ports. 
The ensuing table for Router Ports settings are informational only: VLAN ID, Port, and Expiry 

Time (Sec). 

 

MLD Snooping 

The MLD Snooping page allows you to select the snooping status (enable or disable), the 

version (V1 or V2), and the enabling/disabling of the report suppression for the MLD querier, 

which sends out periodic general MLD queries and are forwarded through all ports in the VLAN. 

MLD Settings 

To access this page, click L2 Switching > Multicast > MLD Snooping > MLD Settings. 

 

Figure 4.34 L2 Switching > Multicast > MLD Snooping > MLD Settings   

 

 

Summary of Contents for LNP-2804GN-SFP-T




















































































































































Reviews:

No comments