Antaira Technologies - Industrial Ethernet Switches
LNP-2804GN-SFP-T User Manual V1.0
37
Figure 4.18 L2 Switching > Link Aggregation > LAG Management
The following table describes the items in the previous figure.
Item
Description
LAG
Click the drop-down menu to select the designated trunk group:
Trunk 1 ~ 8.
Name
Enter an entry to specify the LAG name.
Type
Click the radio button to specify the type mode: Static or LACP.
Ports
Click the drop-down menu to select designated ports: GE1-28.
Apply
Click Apply to save the values and update the screen.
The ensuing table for LAG Management Information settings are informational only: LAG,
Name, Type, Link State, Active Member, Standby Member, Edit (click to modify the settings)
and Clear (click to load default settings).
LAG Port Settings
The LAG Port Settings page allows you to enable or disable, set LAG status, speed and flow
control functions.
In this example, we will configure a LAG between the following switches:
To access this page, click L2 Switching > Link Aggregation > LAG Port Settings.