Antaira Technologies - Industrial Ethernet Switches
LNP-2804GN-SFP-T User Manual V1.0
36
The ensuing table for Mirror Status settings are informational only: Session ID, Destination Port,
Ingress State, Source TX Port and Source RX Port.
4.21 Link Aggregation
Link Aggregation is a method for combining multiple network connections in parallel in order to
increase throughput beyond the capability of a single connection, and to provide redundancy in
case one of the links should fail.
Load Balance
The Load Balancing page allows you to select between a MAC Address or IP/MAC Address
algorithm for the even distribution of IP traffic across two or more links.
To access this page, click L2 Switching > Link Aggregation > Load Balance.
Figure 4.17 L2 Switching > Link Aggregation > Load Balance
The following table describes the items in the previous figure.
Item
Description
Load Balance
Algorithm
Select the radio button to select the Load Balance Setting: MAC
Address or IP/MAC Address.
Apply
Click Apply to save the values and update the screen.
The ensuing table for Load Balance Information settings are informational only: Load Balance
Algorithm.
LAG Management
Link aggregation is also known as trunking. It is a feature available on the Ethernet gateway and
is used with Layer 2 Bridging. Link aggregation allows for the logical merging of multiple ports
into a single link.
To access this page, click L2 Switching > Link Aggregation > LAG Management.