Antaira Technologies
LNP-1600G Series
16-Port Industrial PoE+ Unmanaged Gigabit Ethernet Switch,
w/16*10/100/1000Tx (30W/Port)
Quick Installation Guide
Version 1.1
(August 2020)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000079
Package Check List
The package contains the following items:
⚫
1
– Quick installation guide
⚫
1
– LNP-1600G(-T)
⚫
1
– Wall mounting bracket set with screws
⚫
1
– DC cable –18 AWG & DC jack 5.5 x 2.1mm
⚫
1
– RJ45 dust cover set
Front Panel Layout
Top Panel View
LNP-1600G series
’ top panel is equipped with one 6-pin removal
terminal block connector for dual DC power inputs
(48~55VDC).
Product Overview
System Interface/Performance
All RJ45 ports support the auto MDI function
Embedded 16*10/100/1000Tx (PSE: 30W/Port)
Store-and-Forward switching architecture
8K MAC Address Table
Power line EFT protection: 2,000VDC; Ethernet ESD
Protection: 6,000VDC
Power Input & Connection
DC 48 to 55V redundant power, with a 6-pin removal
terminal block
It is recommended to use a UL listed industrial power supply
Operating Temperature
Standard operating temperature model: -10°C to 65°C
Extended operating temperature model: -40°C to 75°C
Case/Installation
IP30 protection
DIN-Rail and wall mount design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Power input 1 or 2 is inactive
Off
Both power input 1 and 2 are active
PoE Indicator
(Port 1~16)
Green
On
The port is supplying power to the powered-device
Off
No powered-device attached or power supplying fails
LAN Port
(Port 1~16)
Green
On
Connected to network, 1000Mbps
Flashing
Networking is active
Off
Not connected to network
Green
On
Connected to network, 10/100Mbps
Flashing
Networking is active
Off
Not connected to network
Quick Installation
Ethernet Ports
RJ45 Ports (Auto MDI)
All RJ45 ports are auto-sensing for 10Base-T, 100Base-TX, or
1000Base-T device connections. Please follow the wiring pin
assignment table below for Ethernet port installation.
RJ45 Ethernet Port Pin Outs
Pins
T568A Color
T568B Color
10Base-T,
100Base-TX
1000
Base-T(X)
Pin 1
white/green stripe
white/orange stripe
Rx+
TP0+
Pin 2
green solid
orange solid
Rx-
TP0-
Pin 3
white/orange stripe
white/green stripe
Tx+
TP1+
Pin 4
blue solid
blue solid
unused
TP2+
Pin 5
white/blue stripe
white/blue stripe
unused
TP2-
Pin 6
orange solid
green solid
Tx-
TP1-
Pin 7
white/brown stripe
white/brown stripe
unused
TP3+
Pin 8
brown solid
brown solid
unused
TP3-
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
LAN# 1~16
– 10/100/1000Tx RJ45
LAN# 1~16
– LED for Link/Activity Status
1000Mbps
LAN# 1~16
– LED for Link/Activity Status
10/100Mbps
LED for Power 1, Power 2 and Fault
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
LAN# 1~16
– LED for PoE Status
