Antaira Technologies - Industrial Ethernet Switches
LNP-1204G-10G-SFP Hardware Manual V1.1
9
2.2 Front Panel
The front panel of the LNP-1204G-10G-SFP industrial gigabit unmanaged Ethernet switch is
shown below in
Figure 2.2
.
Figure 2.2 -
The Front Panel of LNP-1204G-10G-SFP
2.3 Top View
Figure 2.3
, below, shows the top panel of the LNP-1204G-10G-SFP switch that is equipped with
one 6-pin removal terminal block connector for dual DC power inputs (48~55VDC).
Figure 2.3
Top Panel View of LNP-1204G-10G-SFP
LED for Power 1, Power 2, and Fault
6-Pin Removal Terminal Block
Grounding Screw
6-Pin Removal Terminal Block
Grounding Screw
SFP Port# 11~12
– 10G
SFP Port# 11~12 LED for
Link/Activity Status 10G
LAN# 1~8
– 10/100/1000Tx RJ45
LAN# 1~8 LED for Link/Activity Status
10/100/1000Mbps
LAN# 1~8 LED for PoE Status
SFP Port# 9~10 - 1000
SFP Port# 9~10
– LED for Link/Activity Status
1000Mbps
