ANTAIRA LNP-1202G-SFP Series, Quick Installation Manual

Page: 1 / 2

Antaira Technologies
LNP-1202G-SFP Series
12-Port Industrial PoE+ Gigabit Unmanaged Ethernet Switch,
w/8*10/100/1000Tx (PSE: 30W/Port), 2*10/100/1000Tx, and
2*100/1000 SFP Slots
Package Check List
The package contains the following items:
⚫
1
– Quick installation guide
⚫
1
– LNP-1202G-SFP(-T)
⚫
1
– Wall mounting bracket set with screws
⚫
1
– DC cable –18 AWG & DC jack 5.5 x 2.1mm
⚫
1
– RJ45 dust cover set
Front Panel Layout
6-Pin Removal Terminal Block (Power Input)
Grounding Screw
LED for Power 1, Power 2, and Fault
Power Input & Connection

DC 48 to 55V redundant power, with a 6-pin removal
terminal block

It is recommended to use a UL listed industrial power supply
Operating Temperature

Standard operating temperature model: -10°C to 70°C

Extended operating temperature model: -40°C to 75°C
Case/Installation

IP30 protection

DIN-Rail and wall mount design
LED Indicators
Quick Installation Guide
Version 1.0
(June 2018)
SFP# 11~12 LED for Link/Activity Status
LAN# 1~10 LED for Link/Activity
Status 1000Mbps
LAN# 1~10 LED for Link/Activity
Status 10/100Mbps
SFP# 11~12
– 100/1000
LAN# 1~8 LED for PoE Indicators
LAN# 1~10
– 10/100/1000Tx RJ45
Top Panel View
LNP-1202G-SFP series top panel is equipped with one 6-pin
removal terminal block connector for dual DC power inputs
(48~55VDC).
6-Pin Removal Terminal Block (Power Input)
Product Overview
System Interface/Performance
Grounding Screw
Quick Installation
Ethernet Ports
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000073

All RJ45 ports support the auto MDI/MDI-X function

Embedded 8*10/100/1000Tx (30W/Port), 2*10/100/1000Tx
and 2*100/1000 SFP slots

Store-and-forward switching architecture

8K MAC address table

Jumbo frame supports: 9.6K

Power line EFT protection: 2,000VDC; Ethernet ESD
Protection: 6,000VDC
RJ45 Ports (Auto MDI/MDIX)
All RJ45 ports are auto-sensing for 10Base-T, 100Base-TX, or
1000Base-T device connections. Please follow the wiring pin
assignment table below for Ethernet port installation.
LED Color Description
Power 1 Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2 Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault Red
On
Power input 1 or 2 is inactive
Off
Both power input 1 and 2 are active
PoE Indicators
(Port 1~8)
Green
On
The port is supplying power to the powered device
Off
No powered-device attached or power supplying
fails
LAN Port 1~10
(Upper LED)
Green
On
Connected to network, 1000Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1~10
(Lower LED)
Green
On
Connected to network, 10/100Mbps
Flashing
Networking is active
Off
Not connected to network
Fiber Port
#11~12
SFP LINK/ACT
Green
On
Connected to network, 1000Mbps
Flashing
Networking is active
Off
Not connected to network
Fiber Port
#11~12
SFP LINK/ACT
Amber
On
Connected to network, 100Mbps
Flashing
Networking is active
Off
Not connected to network