Antaira Technologies
LNP-0800G Series
8-Port Industrial Gigabit PoE+ Unmanaged Ethernet Switch,
w/8*10/100/1000Tx (30W/Port)
Quick Installation Guide
Version 1.0
(April 2022)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000204
Package Check List
The package contains the following items:
1 – Quick installation guide
1 – LNP-0800G(-T)
1 – Wall mounting bracket set with screws
1 – DC cable –18 AWG & DC jack 5.5 x 2.1mm
1 – Dust cover set
Front Panel Layout
Top Panel View
LNP-0800G Series top panel is equipped with one 6-pin removal
terminal block connector for dual DC power inputs
(48~55VDC).
Product Overview
System Interface/Performance
All RJ45 ports support the auto MDI/MDI-X function
Embedded
8*10/100/1000Tx
(30W/Port) RJ45 ports
Store-and-forward switching architecture
8K MAC address table
Power Input & Connection
DC 48 to 55V redundant power
with a 6-pin removal terminal
block
It is recommended to use a UL listed industrial power supply
Operating Temperature
Standard operating temperature model: -10°C to 65°C
Extended operating temperature model: -40°C to 75°C
Case/Installation
IP30 protection
DIN-Rail and wall mount design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Power input 1 or 2 is inactive
Off
Both power input 1 and 2 are active
LAN Port 1~8
(Upper LED)
Green
On
Connected to network, 10/100/1000Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1~8
(Lower LED)
Green
On
The port is supplying power to the powered-device
Off
No powered-device attached or power supplying fails
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
LAN# 1~8 – 10/100/1000Tx RJ45
LAN# 1~8 LED for PoE Status
LAN# 1~8 LED for Link/Activity Status
10/100/1000Mbps
LED for Power 1, Power 2 and Fault
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
