Antaira Technologies
LNP-0800G-M12-67-24
8-Port M12 Industrial IP67 Waterproof Gigabit PoE+ Ethernet
Switch, with 8*10/100/1000Tx with M12 Connector
Quick Installation Guide
Version 1.0
(June 2018)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000067
Package Check List
The package contains the following items:
⚫
1
– Quick installation guide
⚫
1
– LNP-0800G-M12-67-24
⚫
10
– M12 protective caps
Front Panel Layout
1. Power 1 LED
2. Power 2 LED
3. Fault LED
4. PoE Load LED
5. 10/100/1000Mbps Link/Act LED
6. PoE Output LED
7. Screw Holes for Wall Mounting
8. Grounding Screw
9. Power Input Port: M12 4-Pin T-Coded Male Connector
10. Product Label
11. 10/100/1000Base-T(X) Ethernet Port: From port G1 to G8
with M12 8-Pin X-Coded Female Connector
Product Overview
System Interface/Performance
All Ethernet ports support the auto MDI/MDI-X function
M12 connector with IP67 rated protection
Store-and-forward switching architecture
Power Input & Connection
DC 24 to 55V redundant power
It is recommended to use a UL listed industrial power supply
Operating Temperature
operating temperature: -10°C to 60°C
Case/Installation
IP67 protection
Wall Mount design
LED Indicators
LED
Color
Description
P1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
P2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
FAULT
Red
On
There were three possible conditions
would make LED light up:
1. If the current PoE output of all
connected PDs was overload
(>200 Watts)
2. If Power input 1 or Power 2 was
inactive
3. If the current PoE output of one or
more PDs were overload
(>30Watts)
Off
Since the last reset of the FAULT
LED, the PoE output of all connected
PDs has not over 200W and no PD
has been overloaded in this period
and the power 1 & power 2 have not
failed
PoE LOAD
Off
Off
The current PoE output of all
connected PDs is ≤ 50%
Green
On
The current PoE output of all
connected PDs is 51% ~ 70%
Blue
On
The current PoE output of all
connected PDs is 71% ~ 90%
Red
On
The current PoE output of all
connected PDs is 91% ~ 100%
Note: The Max. PoE output of this switch is 200Watts.
L/A
(G1 to G8)
Green
On
Connected to network with 1000
Mbps
Flashing Networking is active
Off
Not connected to network
Amber
On
Connected to network with 10/100
Mbps
Flashing Networking is active
Off
Not connected to network
PoE
.
(G1 to G8)
Orange
On
The current PoE output is enabled
Flashing
Overload occurred (>30Watts) at the
connected PD
Off
The current PoE output is disabled
