Antaira Technologies - Industrial Ethernet Switches
LMX-3228G-10G-SFP Series - Hardware Manual - v1.0
1 Overview
Antaira Technologies’ LMX-3228G-10G-SFP Series is a 32-port industrial gigabit managed Ethernet switch embedded with
4*10/100/1000Tx Ethernet ports, 24*100/1000 dual rate SFP slots, and 4*1G/10G dual rate SFP+ slots for fiber
connections.
1.1 Product Hardware Features
System Interface and Performance
-
All RJ45 ports support Auto MDI/MDI-X Function
-
Embedded 4*10/100/1000Tx RJ45 ports, 24*100/1000 SFP slots, and 4*1G/10G SFP+ slots
-
Store-and-forward switching architecture
-
32K MAC address table
Power Input
-
AC 100~240V redundant or DC -36~60V, with a AC power cable
-
The power input specification complies with the requirements of SELV (Safety Extra Low Voltage) and the power
supply should comply with UL 61010-1 & UL 61010-2-201
Operating Temperature
-
LMX-3228G-10G-SFP: 0°C to 50°C
Case / Installation
-
Metal housing
-
DIN-Rail and wall-mount design
-
Standalone Installation
1.2 Product Software Features
Network Management
-
Web UI based management, SNMP v1/v2c/v3, Serial Console
-
QoS, traffic classification QoS, Cos, bandwidth control for Ingress and Egress, broadcast, unicast, multicast, storm
control, Diffserv
-
IEEE 802.1q VLAN tagging, MAC-based, Protocol-based, IP subnet-based VLAN support
-
IGMP snooping v1/v2/v3, IGMP filtering / throttling, IGMP query up to 1024 group
-
Supports IPv4/IPv6, RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP, HTTPS, SSH, TFTP
Port Configuration
-
Status, statistics, mirroring, rate limiting, event syslog
Event Handling
1
