Antaira Technologies
LMX-0702G-SFP-V2 Series
7-Port Industrial Gigabit Managed Ethernet Switch,
w/5*10/100/1000Tx Ports + 2*100/1000 SFP Slots;
Version 2 Hardware
Quick Installation Guide
Version 1.1
(November 2020)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000127
Package Check List
The package contains the following items:
⚫
1
– Quick installation guide
⚫
1
– LMX-0702G-SFP(-T)-V2
⚫
1
– Wall mounting bracket set with screws
⚫
1
– DC cable –18 AWG & DC jack 5.5 x 2.1mm
⚫
1
– Dust cover set
⚫
1
– RJ45 to DB9 Serial Console cable
Front Panel Layout
Top Panel View
LMX-0702G-SFP-V2 series top panel is equipped with one 6-pin
removal terminal block connector for dual DC power inputs
(12~48VDC).
Product Overview
System Interface/Performance
All RJ45 ports support the auto MDI/MDI-X function
Ethernet connectivity 5*10/100/1000Tx RJ45 ports and
2*100/1000 SFP slots
Store-and-Forward switching architecture
8K MAC address table
Supports 9.6Kbytes jumbo frame
4Mbits memory buffer
Power Input & Connection
DC 12 to 48V redundant power, with a 6-pin removal
terminal block
Max. current: 1A
Relay contact: 24VDC, 1A resistive
It is recommended to use a UL listed industrial power supply
Operating Temperature
Standard operating temperature model: -10°C to 65°C
Extended operating temperature model: -40°C to 75°C
Case/Installation
IP30 protection
DIN-Rail and wall mount design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Green
On
System is ready
Red
Off
1. Power input 1 or 2 is inactive
2. Port link-down / Broken
Master
Green
On
ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode is not active
Ring
Green
On
ERPS Ring Network is active
Flashing
ERPS Ring works abnormally or misconfigure
Off
ERPS Ring Network is not active
LAN Port 1~5
(Upper LED)
Green
On
Connected to network, 1000Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1~5
(Lower LED)
Green
On
Connected to network, 10/100Mbps
Flashing
Networking is active
Off
Not connected to network
Fiber Port 6~7
SFP LNK/ACT
Green:1000Mbps
/
Amber:100Mbps
On
Connected to network, 100/1000Mbps
Flashing
Networking is active
Off
Not connected to network
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
LAN# 1~5
– 10/100/1000Tx RJ45
LAN# 1~5 LED for Link/Activity Status
1000Mbps
Reset Button
LED for Power 1, Power 2, Fault,
Master, and Ring
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
Console Port
USB for Configuration Back-up
LAN# 1~5 LED for Link/Activity Status
10/100Mbps
SFP# 6~7 LED for Link/Activity Status
100/1000
SFP# 6~7
– 100/1000
