Antaira Technologies
LMP-1002G-10G-SFP
10-Port Industrial PoE+ Light Layer 3 Gigabit Managed Ethernet
Switch, w/8*10/100/1000Tx (30W/Port) + 2*1G/10G SFP+ Slots
Quick Installation Guide
Version 1.0
(February 2020)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000096
Package Check List
The package contains the following items:
⚫
1
– Quick installation guide
⚫
1
– LMP-1002G-10G-SFP
⚫
1
– Wall mounting bracket set with screws
⚫
1
– DC cable –18 AWG & DC jack 5.5 x 2.1mm
⚫
1
– RJ45 dust cover set
⚫
1
– RJ45 to DB9 serial console cable
Front Panel Layout
Top Panel View
LMP-1002G-10G-SFP top panel is equipped with a 6-pin
removal terminal block connector (48~55VDC).
Product Overview
System Interface/Performance
All RJ45 ports support the auto MDI/MDI-X function
Embedded 8*10/100/1000Tx RJ45 ports (30W/Port) and
2*1G/10G SFP+ slots
Store-and-forward switching architecture
16K MAC address table
Power line EFT Protection: 2,000VDC; Ethernet ESD
Protection: 6,000VDC
Power Input & Connection
DC 48 to 55V redundant power, with a 6-Pin Removal
Terminal Block
It is recommended to use a UL listed industrial power supply
Operating Temperature
Standard operating temperature model: -40°C to 60°C
Case/Installation
IP30 protection
DIN-Rail and wall mount design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Status
Green
On
The system ready and work fine, and there are no
events occur
Red
On
System booting or an applied alarm (such as port
disconnect) has been triggered
Master
Green
On
ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode is not active
Ring
Green
On
Ring Network is active
Off
Ring Network is not active
LAN Port 1~8
(Upper LED)
Green
On
Connected to network, 10/100/1000Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1~8
(Lower LED)
Green
On
The port is supplying power to the powered-device
Off
No powered-device attached or power supplying fails
LINK/ACT
(SFP Port 9~10)
Green
On
Connected to network, 10Gbps
Flashing
Networking is active
Off
Not connected to network
Amber
On
Connected to network, 1Gbps
Flashing
Networking is active
Off
Not connected to network
Grounding Screw
6-Pin Removal Terminal Block
LAN# 1~8
– 10/100/1000Tx RJ45
LAN# 1~8 LED for PoE Status
LAN# 1~8 LED for Link/Activity Status
10/100/1000Mbps
LED for Power 1, Power 2, Status,
Master, and Ring
Grounding Screw
SFP Port# 9~10 LED for Link/Activity Status
1G/10G
Console Port
USB Configuration Backup
Reset Button
SFP Port# 9~10
– 1G/10G
6-Pin Removal Terminal Block
