Antaira Industrial Ethernet Switches
LMP-0501 Series User Manual V1.0
48
5.12.5 Fault Alarm
When any selected fault event has occurred, the fault LED of the switch’s front panel will light up
and the
electric relay will signal at the same time. Users can check the checkbox of any “Fault
Alarm” type, such as power failure, port link down or broken through the “Fault Alarm” setting
interface to trigger this function.
5.13 MAC Table
The MAC address table is the filtering database that supports queries by the forwarding process,
as to whether a frame received by a given port with a given destination MAC address is to be
forwarded through a given potential transmission port.
5.13.1 MAC Address Table
Figure 5.62
– Event Selection Setting Interface
Figure 5.63
– MAC Address Table Interface
