Antaira Industrial Ethernet Switches
LMP-0501 Series User Manual V1.0
19
Status
Enable or disable a port
Speed/Duplex
User can set the bandwidth of each port as auto-negotiation, 100 full,100
half,10 full,10 half mode.
Flow Control
Support symmetric and asymmetric mode to avoid packet loss when
congestion occurred.
Click the
“Apply” button to save changes.
Click to undo any changes made locally and revert to previously saved
values.
5.4PoE (Power-over-Ethernet)
LMP-0501 series is one of Antaira
’s industrial PoE+ managed switches that has four built-in
IEEE802.3at complaint ports, and each PoE port supports PoE output power up to a maximum of
30W per port. It is also backward compatible with IEEE 802.af to support any standard PoE
powered devices (PD).
5.
4.1 PoE Configuration
Figure 5.14
– PoE Port Configuration Interface
Figure 5.13
– Port Configuration Description
