ANTAIRA LMP-0501-24 Series, User Manual

Page: 8 / 82

Antaira Industrial Ethernet Switches
LMP-0501-24 Series User Manual V1.1
2
 PoE ports weekly power scheduling
 Port Configuration

Status, statistics, mirroring, rate limiting, event syslog

Event Handling
 Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP
trap and Fault Alarm Relay Output

Software Upgrade via TFTP and HTTP
 Configuration Backup – USB Port
1.3 Product Hardware Features

System Interface and Performance
 All RJ-45 ports support Auto MDI/MDI-X Function

Embedded 4*10/100Tx (PSE 30W/Port) RJ45 Ports, and 1*100Fx (SC/ST) fiber ports
with multi-mode (2Km) or single-mode (30Km)

Store-and-forward switching architecture

8K MAC address table
 Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC

Power Input
 DC 12~36V redundant with built-in voltage booster, and a 6-pin removal terminal block
 One user programmable alarm relay contact

Operating Temperature
 Standard operating temperature models: -10°C to 70°C

Extended operating temperature models: -40°C to 75°C

Case/Installation
 IP-30 protection metal housing

Installation in pollution degree to environment

DIN-Rail and wall mount design
1.4 Package Contents

1– LMP-0501-24 series: 5-Port industrial PoE+ managed Ethernet switch, with 4*10/100Tx
(30W/Port) RJ45 ports, and 1*100Fx (SC/ST) fiber ports; 12~36VDC

1-Product CD

2-Wall mounting brackets and screws

1-RJ45 to DB9 Serial Console cable

1-DC cable –18 AWG & DC jack 5.5x2.1mm