38
20MHz will to help reduce interference on the link and improve performance.
* Note: 40MHz bandwidth is non-standard for 802.11n/g mode operation. If you
experience unstable performance change Channel Spectrum Width to 20M.
**
Station setting must match AP Channel Spectrum Width setting.
Maximum :
checking this box will result in maximum Tx output power overriding
regulation.
Obey Regulatory Power :
checking this box will obey Tx output regulatory power by
country.
Channel Scan List
Fig 2.5 Channel Scan List (In US Country Code)
According to the availability of channels in the country codes, the operator can select
which channels to be scanned when scanning for an Access Point. Then the scanned
channels will appear on the Site Survey.
Wireless Security
All the wireless security settings are set under this section.
The operation of the Keys is the same for ALL the Wireless modes.
WPA or WPA2 Authentication
Fig 2.7 WPA (Access Point/Access Point WDS/Repeater WDS)