Page 106 of 117
G.FIT User Guide and Specification, Rev 2.0_Alpha.14
thisisant.
com
Appendix B -
Fitness equipment console simulator
B.1
Introduction
G.FIT Simulator is an application that demonstrates how G.FIT would operate for a given type of fitness
equipment. As a test tool it allows developers to quickly configure the G.FIT module (D52QSKM6IA -A
attached to a USB interface board) settings to see their effect.
B.2
Installing ANT USB interface board driver
Before downloading the required software, you will need to create an account on
Download the ANT USB Interface Board Driver for Windows package from
http://www.thisisant.com/developer/resources/downloads
and extract the entire contents onto the hard drive.
Note:
The ANT USB Interface Board drivers are unsigned. Systems that require signed drivers for installation
(e.g. Windows 8, Windows 10) are required to boot with driver signature enforcement disabled to complete
the installation process. This procedure requires restarting the computer and booting up in a special mode.
This additional step can be found by conducting a Google search.
Run the USBXpressInstaller.exe file contained in the folder. Install the drivers in the desired location.
Figure B-1. Install USB interface driver
A warning message may appear that indicates that
Windows can’t verify the publisher of the driver software.
Click ‘Install this driver software anyway’ to continue.
Figure B-2. Bypass publisher verification
A window will indicate the drivers have installed correctly.