5-3
Enabling System Options
Overview
The following section describes setting the AUTOPULSE Z-28’s system options. Click on the
Panel tab and then choose the System Options radio button to gain access to the options. Refer
to the applicable section below for information on a specific system option.
Figure 5-2. System Options Screen
Time Format
The Time Format option allows you to display system time in 12- or 24-hour format. That is,
time is displayed in either a 12-hour format that uses an AM (morning) or PM (afternoon)
designation, or in 24-hour (military style) format.
The Time format directly affects how time is displayed on the AUTOPULSE Z-28 not only at
the high-level status screen but in the Historical Logs.
Enable either 12- or 24-hour format by selecting the appropriate check box, as shown below:
Refer to Figure 5-2 for the location of this option.
Figure 5-3. Time Format Option
Continued on next page
