1-3
Programmer Overview
Overview
The PC Programmer application provides a graphical interface for programming the
AUTOPULSE Z-28 FACP. This application contains the following major components.
•
A set of Tabs corresponding to the major programmable components of the AUTOPULSE
Z-28 system. Clicking on a tab gains access to a window that allows you to program a
specific set of system attributes. Figure 1-1 shows the location of the tabs. Refer to
"Tabs" later in this section for specific information.
•
Icons that allow you to quickly perform routine tasks such as printing, saving a job, etc.
Refer to Figure 1-2 for a quick reference on each icon's function.
•
Menus containing groups of similar choices. All menu choices have a counterpart on the
Icon Bar.
Figure 1-1. Programmer Application, Showing Location of
Tabs, Icons, and Menus
Continued on next page
Menus group similar tasks
Icons provide quick
access to common tasks
Tabs access related
programming options
and choices
