Control Point Types,
Continued
A-4
ALTERN
Elevator capture - alternate. Used for a relay connected to the elevator controls to provide
alternate floor elevator recall.
BSIGNAL
Trouble/supervisory "bell" signal. Used when an audible signal should activate on any
supervisory or trouble condition and remain ON until the condition has been acknowledged.
DHOLDER
Door holder control (normally off). Used when the auxiliary relay is connected to door
holders. The relay energizes on alarm, loss of AC Power, or when programmed.
PRIMARY
Elevator capture - primary. Used for any relay connected to the elevator controls to provide
primary floor elevator recall. By default, these relays pick on any alarm.
Continued on next page
Circuit Status
LCD Display
System Status
ON
ALT Elevator Recall
ON
OFF
ALT Elevator Recall
OFF
ALT Elevator Recall
CODING
Disabled TBL
ALT Elevator Recall
TROUBLE
OFF AUTO TBL
ALT Elevator Recall
TROUBLE
Circuit Status
LCD Display
System Status
ON
Trouble Signal
ON
OFF
Trouble Signal
OFF
Trouble Signal
CODING
Disabled TBL
Trouble Signal
TROUBLE
OFF AUTO TBL
Trouble Signal
TROUBLE
Circuit Status
LCD Display
System Status
ON
Door Holder
ON
OFF
Door Holder
OFF
Door Holder
CODING
Disabled TBL
Door Holder
TROUBLE
OFF AUTO TBL
Door Holder
TROUBLE
Circuit Status
LCD Display
System Status
ON
Pri Elevator Capture
ON
OFF
Pri Elevator Capture
OFF
Pri Elevator Capture
CODING
Disabled TBL
Pri Elevator Capture
TROUBLE
OFF AUTO TBL
Pri Elevator Capture
TROUBLE
