Overview - List Tab,
Continued
8-3
Sorting the Point Display
The right side of the List window contains the points that can be added to system and user-
defined lists. You can sort and filter this list as follows:
1.
Click on the View button. A dialog similar to the following appears.
Figure 8-2. Point Display Filter
2.
Select the Sort/Filter options as follows:
a.
Change the view to a Site-, Card-, or Point-specific view by clicking on the
appropriate radio button in the View panel. Site View shows a list of the points
grouped by site information. Card View organizes the points according to which card
they are associated with. Point View is the default view. It displays a numerical list
of all points.
b.
Choose Ascending or Descending order. Ascending order lists the points from
highest number to lowest and descending lists the points from lowest to highest.
c.
Click on the Device drop down list box. This selection allows you to display only
points with a specific device type. Choose All to see all points.
d.
Click on the Point drop down list box. This selection allows you to display only
points with a specific point type. Choose All to see all points.
