SE
25
GB
Fig. 5
Oscillation button
Angle button
The motor unit can be tilted upwards or downwards to the desired airflow direction.
• Loosen the locking ring under the motor unit and adjust to the required angle. Tighten the
locking ring (fig. 5).
• Set the desired airflow direction laterally by pulling up the oscillation button when the fan is
turned to the desired angle. Activate oscillation by pressing down the oscillation button.
START/STOP AND SPEED SETTING
Start/stop and speed setting is controlled using the power switch.
0 = switched off
1 = low speed
2 = middle speed
3 = high speed
ANGLE SETTING
Switch off the fan. Undo the adjuster screw slightly by turning it anti-clockwise. Set the required angle
and tighten the adjuster screw.
CLEANING
• Switch off the appliance and unplug the power cord when the appliance is not in use, and before
assembling/dismantling parts or cleaning.
• Keep the ventilation openings clean. Vacuum if necessary. Do not insert objects into the
ventilation openings.
• Clean the appliance with a cloth or sponge, moistened with a mild detergent. Always be very
careful to ensure that no water or other liquid enters the motor housing or control panel.
• Wipe off the machine with a cloth or sponge, moistened with clean water.
IMPORTANT!
Do not use strong detergent or solvents.
