58
11.1
Installation Precautions
1.
The printer must be equipped with an anti-collision mechanism and tighten all screws
after installation. In the absence of an anti-collision mechanism for the nozzle, any
external damage suffered (such as a box impact nozzle) is not covered by the warranty.
2.
Please remove the cartridge at a 15-degree angle.
3.
Users are strongly advised to ground the power supply, and should avoid sharing power
with large power equipment such as motors.
4.
If there is too much dust in the working environment, it is strongly recommended to
use an air compressor to remove internal dust.
11.2
Operation Precautions
1.
When the printing result is blurred, please confirm that the distance between the
nozzle and the object remain within 5mm for the best print distance.
2.
When ink trailing occurs in the print, please wipe the surface of cartridge nozzle with
the special wipe.
3.
If the printing position is not correct, please press the [Tab|→] button on the remote
control to set the optimal printing position.
4.
By default no action after 30 seconds will activate the screen protection mechanism.
The screen will automatically turn off, press any key in the remote control to restart
the screen.
5.
If the printer appears cannot solve the fault, please contact the distributor.