manualshive.com logo in svg

Ansell ALPHATEC FLASH, Instructions For Use Manual, Page: 7 / 48

Share
Download
Ansell ALPHATEC FLASH Instructions For Use Manual Download Page 7

7

3. Approvals

3.1 NFPA

AlphaTec

®

 FLASH is certified to NFPA 1991:2016, “Standard on vapor-protective 

 

ensembles for hazardous materials emergencies”, including the Optional Chemical Flash 
Fire protection requirements and the Optional Liquefied Gas protective requirements.

AlphaTec

®

 FLASH is certified by SEI (Safety 

 

Equipment Institute, USA). 

Upon certification, an SCBA type Scott AV3000 and an MSA Ultra Elite mask were used, but 
other SCBAs may also be used with the suit.

3.1.1 Approved accessories

Boots:
• Onguard Hazmax #87015 or #87012 boot
• Tingley Hazproof #82330 or #82331 boot

Passthroughs:
• AlphaTec

®

 (TRELLCHEM

®

) combined Regulating valve & Passthrough 

 

• Interspiro 
• Survivair 
• Scott 
• Dräger 

• MSA

3.2 European EC Type approval

AlphaTec

®

 FLASH is certified to the following European standards:

• EN 943-1:2015 and EN 943-1/FprA1:2018
• EN 943-2:2002 / FprEN943-2:2018 gastight suits
• EN 14126:2003 infective agent protection
• EN 1073-2:2002 radioactive particle protection
• EN 1149-5:2008 antistatic suit material

AlphaTec

®

 FLASH has been tested and approved by notified body no 0200; 

 

FORCE Certification A/S, Denmark.

Cert. Mod. (NFPA 1991, 2016 edition)

Summary of Contents for ALPHATEC FLASH

















































Reviews:

No comments