Anrtisu Cell Master MT8212B, User Manual, Page: 98 / 294

q
Signal Standard
¾ Opens a menu of soft keys used to select the signal stan-
dard to be used. For more information on signal standards, refer to Appendix
C.
q
Select Standard
¾ Opens the signal standard menu, showing the currently
selected signal standards. Use the soft keys to navigate the list. Press the
Show All
soft key to show the complete signal standard list. When the
complete list is displayed, the currently selected signal standards are
marked with an asterisk. Press the
Show Selected
soft key to show only
the currently selected signal standards.
q
Select Channel
¾ Sets the channel information for the available standard.
q
Back
¾ Returns to the previous menu.
AMPLITUDE Choosing AMPLITUDE in CDMA mode causes the soft keys, below, to be dis-
played and the corresponding values to be shown in the message area.
q
CDP Scale
— The CDP (Code Domain Power) scale can be manually set
from 1 dB/Div to 15 dB/Div.
q
dBm/Watts
— The measurement results can be displayed in either dBm or
Watts.
q
Power Offset
— Choose Power Offset to have the Cell Master automatically
adjust for the loss through any external cables, attenuators, and couplers.
NOTE: If the loss is not known, Option 21, Transmission Measurement, or the
Offset Calibration can be used to measure the loss of the system.
2-74
Chapter 2 Functions and Operations