Anrtisu Cell Master MT8212B, User Manual, Page: 94 / 294

q
Select Standard
¾ Opens the signal standard menu, showing the currently
selected signal standards. Use the soft keys to navigate the list. Press the
Show All
soft key to show the complete signal standard list. When the
complete list is displayed, the currently selected signal standards are
marked with an asterisk. Press the
Show Selected
soft key to show only
the currently selected signal standards.
q
Select Channel
¾ Sets the channel information for the available standard.
q
Back
¾ Returns to the previous menu.
q
External Ref Freq
¾ Enter the External Reference Frequency value using the
Up/Down arrow key or keypad, press ENTER to accept, ESCAPE to restore
the previous value.
AMPLITUDE Choosing AMPLITUDE in GSM mode causes the soft keys, below, to be dis-
played and the corresponding values to be shown in the message area.
q
dBm/Watts
— The measurement results can be displayed in either dBm or
Watts.
q
Power Offset
— Choose Power Offset to have the Cell Master automatically
adjust for the loss through any external cables, attenuators, and couplers.
MEAS/DISP Choosing MEAS/DISP in GSM mode causes the soft keys below to be dis-
played.
q
Spectrum
– Display the GSM spectrum.
q
Power vs. Time (Frame)
– Display the frame.
q
Power vs. Time (Slot)
– Display the slot.
2-70
Chapter 2 Functions and Operations