Anrtisu Cell Master MT8212B, User Manual, Page: 47 / 294

q
Marker To Channel
— Displays the closest channel to the marker fre-
quency in the edit box. Entering a different channel number will cause the
marker to go to that channel.
q
Marker To Peak
— Places the selected marker at the frequency with the
maximum amplitude value.
q
Marker Freq To Center
— Makes the center frequency of the Cell Master
equal to the frequency of the selected marker.
q
Back
— Returns to the Main Markers Menu.
q
M2
through
M4
— Selects the marker parameter and opens the marker second
level menu.
q
On/Off
— Turns the selected marker on or off.
q
Edit
— Opens the selected marker parameter for data entry. Press ENTER
when data entry is complete or ESCAPE to restore the previous value.
q
Delta (Mx-M1)
— Displays delta amplitude value as well as delta fre-
quency for the selected marker with respect to the M1 marker.
q
Marker To Peak
— Places the selected marker at the frequency with the
maximum amplitude value.
q
Marker Freq To Center
— Makes the center frequency of the Cell Master
equal to the frequency of the selected marker.
q
Back
— Returns to the Main Markers Menu.
q
All Off
— Turns all markers off.
q
More
— Opens the continuation of the Marker Menus.
q
M5
— Selects the M5 marker parameter and opens the M5 second level
menu.
q
On/Off
— Turns the selected marker on or off.
q
Edit
— Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the pre-
vious value.
q
Marker Freq To Center
— Makes the center frequency of the Cell
Master equal to the frequency of the selected marker.
q
Peak Between M1 & M2
— Places the selected marker at the fre-
quency with the maximum amplitude value between marker M1 and
marker M2.
q
Valley Between M1 & M2
— Places the selected marker at the fre-
quency with the minimum amplitude value between marker M1 and
marker M2.
q
Back
— Returns to the Main Markers Menu.
q
M6
— Selects the M6 marker parameter and opens the M6 second level
menu.
q
On/Off
— Turns the selected marker on or off.
q
Edit
— Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the pre-
vious value.
Chapter 2 Functions and Operations
2-23