Anrtisu Cell Master MT8212B, User Manual, Page: 36 / 294

MARKER Choosing MARKER in cable and antenna analyzer freq and dist mode causes
the soft keys, below, to be displayed and the corresponding values to be shown
in the message area. Selected frequency marker or distance marker locations
may be changed using the keypad or Up/Down arrow key.
q
M1
— Selects the M1 marker parameter and opens the M1 marker second
level menu.
q
On/Off
— Turns the selected marker on or off.
q
Edit
— Opens the selected marker parameter for data entry. Press ENTER
when data entry is complete or ESCAPE to restore the previous value.
q
Marker To Peak
— Places the selected marker at the frequency or distance
with the maximum amplitude value.
q
Marker To Valley
— Places the selected marker at the frequency or dis-
tance with the minimum amplitude value.
q
Back
— Returns to the Main Markers Menu.
q
M2
through
M4
— Selects the marker parameter and opens the marker second
level menu.
q
On/Off
— Turns the selected marker on or off.
q
Edit
— Opens the selected marker parameter for data entry. Press ENTER
when data entry is complete or ESCAPE to restore the previous value.
q
Delta (Mx-M1)
— Displays delta amplitude value as well as delta fre-
quency or distance for the selected marker with respect to the M1 marker.
q
Marker To Peak
— Places the selected marker at the frequency or distance
with the maximum amplitude value.
q
Marker To Valley
— Places the selected marker at the frequency or dis-
tance with the minimum amplitude value.
q
Back
— Returns to the Main Markers Menu.
q
All Off
— Turns all markers off.
q
More
— Opens the continuation of the Marker Menus.
q
M5
— Selects the M5 marker parameter and opens the M5 second level
menu.
q
On/Off
— Turns the selected marker on or off.
q
Edit
— Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the pre-
vious value.
q
Peak Between M1 & M2
— Places the selected marker at the fre-
quency or distance with the maximum amplitude value between
marker M1 and marker M2.
q
Valley Between M1 & M2
— Places the selected marker at the fre-
quency or distance with the minimum amplitude value between
marker M1 and marker M2.
q
Back
— Returns to the Main Markers Menu.
q
M6
— Selects the M6 marker parameter and opens the M6 second level
menu.
q
On/Off
— Turns the selected marker on or off.
2-12
Chapter 2 Functions and Operations