Anrtisu Cell Master MT8212B, User Manual, Page: 250 / 294

Softkeys
The following soft keys are available in CW Signal Generator mode:
q
Freq
— Enter a CW frequency from 25 MHz to 3000 MHz using the
Up/Down arrow key, or the keypad and the appropriate soft key for Hz, kHz,
MHz or GHz. Press ENTER to accept the input.
q
Display Setup Help
— Selecting this soft key displays a diagram of the rec-
ommended setup to use this option.
Negative Offset
The negative offset in CW Signal Generator Mode allows the connection of an attenuator
after the divider to obtain the level after the attenuator. For instance, if the pad before the
divider is set to 70 dB, and the instrument reads about -73 dBm, and a 40 dB pad is placed
between the divider and the DUT, the instrument would still read -73 dB even though the
level to the DUT is -113 dB. Setting the offset to -40 dB will set the instrument to -113
dBm, the same as the level the DUT is seeing.
Chapter 17 CW Signal Generator
17-3