Anritsu Spectrum Master MS2720T, User Manual

Page: 874 / 1035

EVDO Signal Analyzer 3-14 Measurements Menu
3GPP2 MG PN: 10580-00235 Rev. D 3-31
Over-The-Air Menu
Key Sequence:
Measurements > OTA
Pass Fail Mode Menu
Key Sequence:
Measurements > Pass Fail
Pilot Scan: Displays the power of the 9 strongest PNs in histogram
graphical format. The strongest PN or the user-selected PN is color coded
blue, those colored red are probably real pilots, and the remaining, which are
color coded gray, are probably noise. PN, Ec/Io, and Tau are displayed
below each PN bar graph signal. Pilot Power (dBm), Channel Power (dBm),
and Pilot Dominance (dB) are displayed below the graph.
Multipath: Displays six multipaths in histogram graphical format. The
strongest is color coded blue. The remaining signals are color coded red,
or they are color coded gray if they are due to system noise. The numerical
results that are displayed in this view are Ec/Io (dB) and Tau for each path.
Channel Power, and Multipath Power are displayed below the graph.
Back: Returns to the “Measurements Menu” on page 3-25 .
Figure 3-27. EVDO Over-The-Air Menu
Select Pass/Fail Test: This submenu key function allows the selection of a
user-defined file that specifies a list of measurements with pass fail criteria.
Select a test model by using the arrow keys or rotary knob. This mode will
sequentially assess the appropriate measurements and indicate a pass or
fail state based upon the test model criteria. Custom pass fail tests can be
created by using Master Software Tools.
Reset: Press this submenu key to restart the measurement.
Back: Returns to the “Measurements Menu” on page 3-25 .
Figure 3-28. EVDO Pass Fail Mode Menu
Over-The-Air
Multipath
Pilot Scan
Back
Pass Fail Mode
Select
Pass/Fail
Test
Back
Reset
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com