Anritsu Spectrum Master MS2720T, User Manual

Page: 731 / 1035

6-5 TD-LTE Over-the-Air (OTA) Measurements TD-LTE Signal Analyzer
6-20 PN: 10580-00234 Rev. T 3GPP MG
c. Use the
Auto Save
submenu key to automatically save measurement records.
The instrument logs a data record at the end of each measurement cycle.
A maximum of 10,000 records can be stored in a file.
4. Press the
Back
submenu key to return to the Over-the-Air menu.
Tx Test
1. Press the
Measurements
main menu key.
2. Press the
Over-the-Air
submenu key.
3. Press the
Tx Test
submenu key to activate the OTA Tx Test display
( Figure 6-13 on page 6-21 ). Press the
Tx Test
key again to display the OTA Tx Test
menu.
4. Press the
Show Mod Results
key to display or hide the PBCH Modulation Results
(Strongest SS) table.
5. Press
Back
to return to the Over-the-Air menu.
Figure 6-12. Over-the-Air Measurements
Note
When Show Mod Results is on, the Tx Test measurement speed is slower due to
the additional time required to demodulate the strongest signal.
Some instruments require the TD-LTE demod option to toggle this submenu to On.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com