Anritsu Site Master S330A, User Manual, Page: 73 / 85

Note:
If you changed the COM Port Base Address and/or
IRQ, you will need to restart Windows.
Changing COM Port Settings–Wi ndows 95
Refer to Figure 3-2 while performing the following procedure.
Step 1.
Open the Windows Control Panel.
Step 2.
Double click on the SYSTEM icon. The System
Properties window appears.
Step 3.
Select Device Manager. The Device List appears.
3-4
Chapter 3 Screen Capture Program
Figure 3-2. Windows 95 COM Port Setting Dialog Boxes