Anritsu Site Master S112, User Manual, Page: 50 / 83

Step 21. Enter the desired numerical value using the keypad (1
to 9) or the Up/Down Arrow key. Press
ENTER
when data entry is complete.
Recalling a Setup
Step 22. Press the RECALL SETUP key.
Step 23. Enter the desired numerical value using the keypad (1
to 9) or the Up/Down Arrow key. Press
ENTER
when data entry is complete. To restore the factory
defaults, enter 0, then press
ENTER
.
Storing a Display
Step 24.
Press the SAVE DISPLAY key.
Step 25. Enter the desired numerical value using the keypad (1
to 40) or the Up/Down Arrow key. Press
ENTER
when data entry is complete.
Recalling a Display
Step 26. Press the RECALL DISPLAY key.
Step 27. Enter the desired numerical value using the keypad (1
to 40) or the Up/Down Arrow key. Press
ENTER
when data entry is complete.
2 - 34
Chapter 2 Operation