Anritsu s332e, User Manual

Page: 54 / 102

4-4 File Menu File Management
4-8 PN: 10580-00252 Rev. J Site Master User Guide
4-4 File Menu
Key Sequence:
File
Save Measurement As: This key will save the current setup with a user
defined file name. The default file name is changed using the Save
submenu. To change the default file name, type in a new file with the touch
screen keyboard and press
Enter . After a few seconds the screen with return
to File menu. Press the Save Measurement As key again and the new file
name will be used. Measurement files names have a .vna or .spa extension.
Save Measurement: Press this submenu key to display the “Save Menu”
on page 4-9 and the touch screen keyboard. Measurements can be saved to
internal memory or to a USB flash drive. The saved measurement can be
named by using touch screen keyboard. By default, measurements are
saved in a directory named /user to internal memory. The save destination is
set with the
“Save Location Menu” on page 4-10 .
Save: Press this submenu key to display the “Save Menu” on page 4-9 and
the touch screen keyboard. Measurements can be saved to internal memory
or to a USB flash drive. The saved setup, measurement or JPEG file can be
named by using touch screen keyboard. By default, measurements are
saved in a directory named /user to internal memory. The save destination is
set with the
“Save Location Menu” on page 4-10 .
Save on Event (Spectrum Analyzer mode only) : Press this submenu key to
display the “Save On Event Menu” on page 4-11 .
Recall Measurement: Press this submenu key to display the “Recall Menu”
on page 4-12 . This menu is for recalling measurements from internal
memory or a USB flash drive.
Recall: Press this submenu key to display the “Recall Menu” on page 4-12 .
This menu is for recalling measurement or setup data from internal memory
or a USB flash drive.
Copy: Press this submenu key to display the “Copy Menu” on page 4-13 .
This submenu is for copying files or folders from internal memory or a USB
flash drive.
Delete: Press this submenu key to display the “Delete Menu” on page 4-14
and a selection box that shows the setup and measurement names, the type
and the date and time that the information was saved. Use the rotary knob or
the
Up/Down arrow keys to highlight the file that is to be deleted and press
the Delete submenu key, then Enter . Press the Esc key to cancel the
operation. Note that deleted files can not be recovered.
Figure 4-7. File Menu
File
Copy
Recall
Recall
Measurement
Recall
Save
On
Event
Save
Save Measurement As
FileName.vna
Save
Measurement
Delete