manualshive.com logo in svg

Anritsu S331E, User Manual, Page: 97 / 126

Share
Download
Anritsu S331E User Manual Download Page 97

Web Remote Control

9-3 Web Remote Control Interface

Site Master User Guide

PN: 10580-00252  Rev. K

9-11

The login page is skipped and the user is directed straight to the Web Remote Control Home 
page if he or she was previously connected to the instrument, then closed the browser without 
logging out, and no other user has logged in to the same instrument since that time.

Instrument Name

The instrument name is displayed in the green title bar of the browser screen. It is useful in 
identifying the instrument when you have more than one instrument connected. The name 
can be assigned remotely from this Device Management page, or it can be set from the 
instrument's System Options menu. Note that this instrument name is not a "hostname" as 
used in an Ethernet router.

Session Time

Use the pull-down menus to select the time, in hours and minutes, before the remote session 
times out. At the end of the selected time period, a message notifying the user that the session 
has expired will be displayed.

Logout

Exits Web Remote Control and displays the login page. See 

Figure 9-2 on page 9-4

. To return 

to Web Remote Control, enter the password or leave the field blank if no password has been 
set, then select the session time and click 

Login

.

Summary of Contents for S331E































































































































Reviews:

No comments