Anritsu Network Master MT9090A Series, Operation Manual, Page: 43 / 200

MT9090A/MU909011A Network Master User’s Guide 2-3
Softkeys
Start Key
Arrow Keys and Set Key
The unit has four softkeys on the front
panel, located to the right of the LCD
screen, and numbered
F1 through F4 . Each
softkey’s function is designated by the
current operating mode of the unit and is
labeled on the screen to the left of given key.
Press the Start key , when in the Fault Locate
application, to start a one-key test.
The Arrow keys (Left/Right/Up/Down) are
used for the following:
Left Arrow key –
•
General Setups–
-
Move the cursor/highlight to
the left a dialog box.
•
Trace View mode –
-
Horizontally contracts a
portion of the trace for wider
examination.