Anritsu Network Master MT9090A Series, Operation Manual, Page: 136 / 200

4-38 MT9090A/MU909011A Network Master User’s Guide
To stop a Real Time test:
•
Press Stop Real Time ( F1 ) to stop the current real
time test. The legend on the softkey changes to
Start Real Time and the real time test ends.
Connection Check
When the Enable Connection Check Step check box is
selected, the unit performs a connection check at the start of
the Fault Locate step, rating the connection as either GOOD,
FAIR, or POOR.
GOOD –
When the Connection Check is “GOOD” the following
screen appears.
The test will auto advance in 5 seconds or you can press
Continue ( F2 ) to proceeded with the test.
FAIR –
When the Connection Check is “FAIR” the following screen
appears.